Причины И Решения Для Лазер Резка Станки К Производить Заусенцы

H52b30eaef41d4ea2bdc7df37ae4f91aes
Как делает лазер резка машина технология сделка с заусенцы? Что есть причина заусенцы в заусенцы в плита обработка лазер резка машина? 
Как делает лазер резка станок технология сделка с те проблема из заусенцы? Когда некоторые клиенты использование лазер резка станки к процесс лист металл, the workpiece of cutting out is very unsatisfactory, and there are many burrs. Then this customers started to doubt the quality of laser cutting machine products.

20210624152410
The burrs will only appear in metal cutting, and there is no burrs in non -metal cutting. How did the burrs come from? In fact, the burrs are remnant particles on the surface of the metal material. If a material has burrs, then this material may have quality defects. The more the burrs, the lower the quality.

Причины и решения для вхождения из заусенцев
1. The upper and lower positions of the beam focus occur. Solution: Adjust the position of the focus and adjust according to the offset position it generates.
2. The output power of the machine is not enough. Solution: Check whether the laser cutting machine is working normally. If abnormalies occur, it is required to perform maintenance and maintenance in time. If normal, check whether the output value is correct.
3. The Резка Скорость Резка Станок Это Тоже Медленный. Решение: Своевременный Регулировка и улучшение линия резка скорость.
4. The Purity of the cutting machine вспомогательный gas is not enough. Solution: improve the purity of the auxiliary gas.
5. Add point offset of the laser beam of the cutting machine. Solution: Debugging the focus and timely adjustment.
6. Laser cutting machines are unstable due to long operation. Solution: Turn off the machine to restart and let the machine rest.
Металл лазер резка станок is a precise machine, and its operation is also a fine job. Обычно a data error leads to abnormal work operation. Следовательно, it is required to be rigorous and careful at work to reduce and avoid errors.

The main cause of the burrs when processed the sheet metal of the laser cutting machine
Когда механическая обработка заготовка, лазер резак использование нагрев генерация по поверхность из заготовка с а лазер луч, so that the поверхность of the workpiece can be evaporate quickly to achieve the purpose of cutting. But there is a core device here that we must pay attention to, that is, auxiliary gas. The Вспомогательный газ is the остаток on the поверхность of the workpiece after the поверхность газификация из облученный поверхность. Если вспомогательный газ is not used, the slag will form a burr after cooling and attach it on the cut surface. This is the main cause of the burr.

Отправить запрос